Switch language: English Switch language: Deutsch

Remote Supervision - Accessories

Accessories

Our accessories for remote monitoring. We keep articles from SMA and Solare Datensysteme

  • 1
1 - 10 from 13 Results

SMA Wireless-Set RS485-01 Radio-Set

873.47 €

SMA Wireless-Set RS485 Connection – Easy without hindrance

There is no easier way to bridge any distances: This wireless kit 485-01 from SMA enables a wireless contact between two parts of a PV system with RS485 and is used in applications where cabling is not possible. Thus, radio modules of the wireless sets connect two buildings or bridge structural obstacles such as roads, railways or rivers without extensive underground cabling. The range is up to 500 meters outdoors and enables flexible use in almost every case. Bridges structural related obstacles RS485 radio link to complete cable Long range Simple commissioning thanks to a pre-configured system Flexible outdoor installation of the radio antenna possible

Price incl. VAT plus delivery

Item number: WZ-008
Delivery time:
by request

Solar-Log Sensor Box

445.06 €

Sensor Box - Pyranometer and Irradiance Sensors with Module Temperature Sensor

Sensors measure the deviations between the potential power production and the current power production and deliver key statistical values in regard to the quality of the whole plant. Solar-Log Monitoring continuously compares the yield data of a plant with the various sensors. If these values deviate from each other, an error message is generated. Depending on the requirements, there are various sensors available for the Solar-Log. The most important element in the Sensor Box is the irradiance sensor. This delivers a reference value for solar radiation and enables conclusions to be drawn about possible power generation problems. The irradiance sensor consists of a single solar cell and should be installed at the same angle as your panels. This helps it to serve as an ideal reference value. Drops in performance even at low levels of radiation can be identified and error messages generated. Due to the built-in internal module temperature sensor, it is easy to analyze reductions in performance. Benefits of communication between the Solar-Log and the Sensor Box: Solar-Log generates an error message in response to any variance that occurs. Errors and malfunctions can be filtered out and analyzed rapidly and reliably. The sensor evaluation provides information about the cause of the fault. Up to 9 Sensor Boxes can be connected to the Solar-Log 1000. The irradiance sensor is equipped with a high-quality monocrystalline cell, which is rugged and specifically designed for long-term use in outdoor locations. The sensors are installed parallel to the panels they are meant to monitor and are connected to the Solar-Log via an RS485 interface.

Price incl. VAT plus delivery

Item number: F-SB-003
Delivery time:
approx. 2 to 4 weeks

SMA Sunny Sensor Box

443.87 €

SMA Sunny Sensor Box - Weatherstation for PV-Plants

The Sunny SensorBox is installed directly at the modules and measures the solar radiation and temperature. In combination with Sunny WebBox and Sunny Portal, it provides a continuous target-actual comparison of plant performance. Thus can be identified shading, soiling or a gradually declining power of the generator and yield is maximized. Additional sensor ports for optional measurement of ambient temperature or wind speed allow more accurate calculations. safe: Rapid fault detection by continuous target-actual comparison of plant performance informative: Precise measurement of irradiance, module temperature, ambient temperature and wind speed comfortable: Easy to install the solar generator Easy integration into existing PV systems via RS485 Data-analysis on any PC or via SMA Sunny Portal

Price incl. VAT plus delivery

Item number: S-05-00037
Delivery time:
by request

Digital Meter, 3-phase, S0-impulse

236.81 €

Digital Meter, 3-phase, S0-impulse, digital Electricity Meter

By adding an electricity meter to a PV plant with different operating modes you gain various extra functions. In one mode it functions as a transmitter, relaying the measured amount of power to the Solar-Log for analysis. If you wish to consume the self-produced power from a PV plant the meter serves as a consumption meter, displaying a comparison of the amount of consumed power with the amount of power produced. The meter can be configured to operate with the Solar-Log in three different modes: 1) Measuring power consumption for the optimal utilization of self-produced power. 2) Measuring the total amount of power that has been fed into the grid from the plant. 3) Inverter mode-measuring the power production from inverters that are not directly supported by Solar-Log. The S0 connection involves the use of a 6-pin S0 In-/Out-connector on the Solar-Log200 / 500 / 1000 with a maximum cable length of 10 meters.

Price incl. VAT plus delivery

Item number: E-ZZ-007
Delivery time:
approx. 2 to 4 weeks

SMA Bluetooth Interface PLUS BTPBINV-NR

137.44 €

SMA Bluetooth Interface PLUS BTPBINV-NR, Piggy Back

SMA interface with external antenna for retrofitting, suitable for inverters: SMA Sunny Boy 1200, SMA Sunny Boy 1700, SMA Sunny Boy 2500, SMA Sunny Boy 3000, SMA Sunny Boy 3300, SMA Sunny Boy 3800, SMA Sunny Mini Central 4600A, SMA Sunny Mini Central 5000A, SMA Sunny Mini Central 6000A, SMA Sunny Boy 1300TL, SMA Sunny Boy 1600TL, SMA Sunny Boy 2100TL, SMA Sunny Mini Central 7000HV, SMA Sunny Mini Central 9000TL, SMA Sunny Mini Central 10000TL, SMA Sunny Mini Central 11000TL

Price incl. VAT plus delivery

Item number: S-05-00134
Delivery time:
by request

SMA RS485-Interface DM-485CB-10

105.42 €

SMA RS485-Interface, DM-485CB-10, is used to retrofit

SMA Interface for retrofitting, suitable for inverter: SMA SB 2500TLST-21, SB 3000TLST-21, SB 3000TL-20, SB 4000TL-20, SB 5000TL-20, SB 3000TL-21, SB 3600TL-21, SB 4000TL-21, SB 5000TL-21, Tripower 8000TL-10, Tripower 10000TL-10, Tripower 12000TL-10, Tripower 15000TL-10, Tripower 17000TL-10, Tripower 15000TLEE-10, Tripower 15000TLHE-10, Tripower 20000TLEE-10, Tripower 20000TLHE-10

Price incl. VAT plus delivery

Item number: S-05-00031
Delivery time:
by request

SMA RS485-Interface 485QM-10-NR

99.97 €

SMA RS485-Interface + Multifunction relay, 485QM-10-NR, Piggy Back

Quick Modul RS485 + Multifunktion-Relais SMA Interface for retrofitting, suitable for inverter: SMA 2000HF-30 / 2500HF-30 / 3000HF-30

Price incl. VAT plus delivery

Item number: S-05-00032
Delivery time:
by request

SMA Bluetooth Interface BTPBINV-NR

99.97 €

SMA Bluetooth Interface, BTPBINV-NR, Piggy Back Bluetooth

SMA Bluetooth Interface for retrofitting, suitable for inverter: SMA SB 1200, SB 1700, SB 2500, SB 3000, SB 3300, SB 3800, SMC 4600A, SMC 5000A, SMC 6000A, SB 1300TL, SB 1600TL, SB 2100TL, SMC 7000HV, SMC 9000TL, SMC 10000TL, SMC 11000TL

Price incl. VAT plus delivery

Item number: S-05-00033
Delivery time:
by request

Powerline network-adapter-kit XETB1001

95.19 €

Powerline network-adapter-kit XETB1001, network connection using electrical power net

Contents: two 85 MBit/s Powerline network-adapters network-cable installation guide configuration-CD waranty and support information card

Price incl. VAT plus delivery

Item number: S-05-00022
Delivery time:
by request

SMA RS485-Interface 485PB-SMC-NR

85.98 €

SMA RS485-Interface, 485PB-SMC-NR, Piggy Back, is used to retrofit

SMA Interface for retrofitting, suitable for inverter: SMA SMC 4600A, 5000A, 6000A, SB 1300TL, 1600TL, 2100TL, 7000HV, 9000TL, 10000TL, 11000TL Eqaul with interface 485PB-NR (S-05-00034), consequently suitable for inverter: SMA SB 1200, 1700, 2500, 3000, 3300, 3800

Price incl. VAT plus delivery

Item number: S-05-00035
Delivery time:
by request

  • 1
1 - 10 from 13 Results

© Copyright 2012 NwComp Solar GmbH. All rights reserved.