Switch language: English Switch language: Deutsch

Mounting System - Mounting Rails

Mounting Rails

Our carrier profiles at a glance. We have sold Schletter and K2 Systems

  • 1
1 - 10 from 14 Results

K2 Minirail end clamp (34-50mm) Set

8.33 €

K2 MiniRail System end clamp (34-50mm) Set, Material: aluminum / stainless steel / EPDM

K2 MiniRail System for trapezoidal sheet metal roofs Simple and extremely fast assembly from above Very attractive price-performance ratio high flexibility with adjustable clamp Suitable for all module frames (34-50 mm) and installation types (landscape and portrait), no additional components required High level of planning security due to low number of simple system components Modular structure suitable for any system size Geometry optimised for K2 system components Small components for optimal warehousing, transport and installation

Price incl. VAT plus delivery

Item number: S-03-01170
Delivery time:
approx. 1 week

K2 Minirail middle clamp (34-50mm) Set

8.33 €

K2 MiniRail System middle clamp (34-50mm) Set, Material: aluminum / stainless steel / EPDM

K2 MiniRail System for trapezoidal sheet metal roofs Simple and extremely fast assembly from above Very attractive price-performance ratio high flexibility with adjustable clamp Suitable for all module frames (34-50 mm) and installation types (landscape and portrait), no additional components required High level of planning security due to low number of simple system components Modular structure suitable for any system size Geometry optimised for K2 system components Small components for optimal warehousing, transport and installation

Price incl. VAT plus delivery

Item number: S-03-01169
Delivery time:
approx. 1 week

K2 SpeedRail (22); 2,10m Profile

8.96 €

K2 Speed ​​Rail System, 2,10 meters, for trapezoidal sheeting

the K2 Speed ​​Rail system for trapezoidal sheeting asy and extremely fast assembly from above with K2 and K2 SpeedClip SpeedLock K2 Speed ​​Rail system rails 22, 36 K2 Speed ​​Rail very attractive price-performance ratio can also cross combination (eg Crossrail) are installed CSTB certification for France High flexibility - for all module types modular design allows any size of system

Price incl. VAT plus delivery

Item number: S-03-01151
Delivery time:
approx. 2 to 4 weeks

K2 SpeedRail (22); 4,20m Profile

15.34 €

K2 Speed ​​Rail System, 4,20 meters, for trapezoidal sheeting

the K2 Speed ​​Rail system for trapezoidal sheeting asy and extremely fast assembly from above with K2 and K2 SpeedClip SpeedLock K2 Speed ​​Rail system rails 22, 36 K2 Speed ​​Rail very attractive price-performance ratio can also cross combination (eg Crossrail) are installed CSTB certification for France High flexibility - for all module types modular design allows any size of system

Price incl. VAT plus delivery

Item number: S-03-01130
Delivery time:
approx. 2 to 4 weeks

K2 SpeedRail (22); 6,10m Profile

22.12 €

K2 Speed ​​Rail System, 6,10 meters Profile, for trapezoidal sheeting

the K2 Speed ​​Rail system for trapezoidal sheeting asy and extremely fast assembly from above with K2 and K2 SpeedClip SpeedLock K2 Speed ​​Rail system rails 22, 36 K2 Speed ​​Rail very attractive price-performance ratio can also cross combination (eg Crossrail) are installed CSTB certification for France High flexibility - for all module types modular design allows any size of system

Price incl. VAT plus delivery

Item number: S-03-00059
Delivery time:
approx. 1 week

K2 SpeedRail (36); 6,10m Profile

28.19 €

K2 Speed ​​Rail System, 6,10 meters profile, for trapezoidal sheeting

the K2 Speed ​​Rail system for trapezoidal sheeting asy and extremely fast assembly from above with K2 and K2 SpeedClip SpeedLock K2 Speed ​​Rail system rails 22, 36 K2 Speed ​​Rail very attractive price-performance ratio can also cross combination (eg Crossrail) are installed CSTB certification for France High flexibility - for all module types modular design allows any size of system

Price incl. VAT plus delivery

Item number: S-03-00115
Delivery time:
approx. 2 to 4 weeks

Schletter FixZ-15 system profile bottom

73.76 €

Schletter FixZ-15 system profile bottom, Further development of the proven system FixZ-7 with a steeper angle of tilt, profile bottom

Quick to assemble and easy Better ventilation Better self-cleaning higher yields Optimal load transfer through the roof With flat trapezoidal sheet metal roofs under 10 degree inclination is a parallel to the roof module mounting due to low yields and insufficient self-cleaning of the modules is not optimal. A normal elevation with supports but in many cases not economically or because of the higher loads for structural reasons not possible in these cases are often only low elevation angles are desired or feasible. Schletter FixZ-15 provides for these problem cases a simple and cost additional elevation. FixZ-15 offers the proven FixZ-7 module an even steeper angle of 11 - 15 degrees. Compared with a roof-parallel assembly even when FixZ-15 there is no installation overhead. The minimal frontal area and optimized geometry, there is only a small additional load on the roof. Please keep in case of sandwich panels in consultation with the manufacturer of the roof or with Schletter. Here, a separate examination of the capacity of the cover sheet may be necessary.

Price incl. VAT plus delivery

Item number: S-03-01127
Delivery time:
approx. 2 to 4 weeks

Schletter FixZ-15 system profile top

169.15 €

Schletter FixZ-15 system profile top, Further development of the proven system FixZ-7 with a steeper angle of tilt, profile top

Quick to assemble and easy Better ventilation Better self-cleaning higher yields Optimal load transfer through the roof With flat trapezoidal sheet metal roofs under 10 degree inclination is a parallel to the roof module mounting due to low yields and insufficient self-cleaning of the modules is not optimal. A normal elevation with supports but in many cases not economically or because of the higher loads for structural reasons not possible in these cases are often only low elevation angles are desired or feasible. Schletter FixZ-15 provides for these problem cases a simple and cost additional elevation. FixZ-15 offers the proven FixZ-7 module an even steeper angle of 11 - 15 degrees. Compared with a roof-parallel assembly even when FixZ-15 there is no installation overhead. The minimal frontal area and optimized geometry, there is only a small additional load on the roof. Please keep in case of sandwich panels in consultation with the manufacturer of the roof or with Schletter. Here, a separate examination of the capacity of the cover sheet may be necessary.

Price incl. VAT plus delivery

Item number: S-03-01126
Delivery time:
approx. 2 to 4 weeks

Schletter FixZ-7 system profile bottom

53.76 €

Schletter FixZ-7 system profile bottom, the optimum additional for slightly inclined trapezoidal sheet metal roof, Profile bottom

Quick to assemble and easy Better ventilation Better self-cleaning Optimal load transfer through the roof With flat trapezoidal sheet roofs below 10 degrees inclination, a roof-parallel module assembly is due to low yields and because of insufficient self-cleaning of the modules is not optimal. A normal elevation with supports but in many cases not economically or because of the higher loads for structural reasons not possible in these cases are often only low elevation angles are desired or feasible.

Price incl. VAT plus delivery

Item number: S-03-00112
Delivery time:
approx. 2 to 4 weeks

Schletter FixZ-7 system profile top

77.61 €

Schletter FixZ-7 system profile top, the optimum additional for slightly inclined trapezoidal sheet metal roof, profile top

Quick to assemble and easy Better ventilation Better self-cleaning Optimal load transfer through the roof With flat trapezoidal sheet roofs below 10 degrees inclination, a roof-parallel module assembly is due to low yields and because of insufficient self-cleaning of the modules is not optimal. A normal elevation with supports but in many cases not economically or because of the higher loads for structural reasons not possible in these cases are often only low elevation angles are desired or feasible.

Price incl. VAT plus delivery

Item number: S-03-00111
Delivery time:
approx. 2 to 4 weeks

  • 1
1 - 10 from 14 Results


© Copyright 2012 NwComp Solar GmbH. All rights reserved.