Switch language: English Switch language: Deutsch

Accessories for

Our accessories. Find accessories for modules, inverters, grid and remote monitoring, and general accessories

41 - 50 from 79 Results

Schletter Plastic distance tube, custom cut (max. 200 mm)

3.76 €

The Schletter mounting system for roof insulation, Material: Aluminium

Rooftop or rafter insulation win both in new buildings, as well as for energy renovations is becoming increasingly important. Schletter Iso07 is a simple attachment system for mounting of PV systems on roofs with roof insulation. Sturdy thick plastic sleeves are used to avoid the transmission of power in the grid and at the same time cold spots in the insulation, which could otherwise lead to moisture damage due to condensation. Please make sure when ordering that at least 60 to 80 mm of the screws must protrude into the wooden support structure in order to achieve a sufficient capacity. We recommend in doubt 3 instead of 2 screws per hook. As a further development of the Schletter IsoTop S in the new system Iso07 additional relief screw is used in conjunction with a special fitting. This additional relief screw (note required length!) Is fixed obliquely upwards in the rafters and allows the detection of attachment with larger insulation thicknesses.

Price incl. VAT plus delivery

Item number: S-03-01136
Delivery time:
approx. 1 week

Schletter EPDM-Sealing-strip 25mm 10m

7.50 €

Schletter EPDM-Sealing-strip 25mm 10m, sealing tape for roof tiles
The simple solution for sealing sanded tiles

Rain resistant. Weather resistance. To compress slightly. Self-adhesive on one side. Contains no substances that can cause repetitive strain injuries. Resistant to mold and microorganisms. Assembly Note: The sealing tape is an impregnated, pre-compressed foam sealing tape. This is bonded to the machined tiles and the roof hooks mounted thereon. Thus, an ingress of water (rain, dew) prevents the roof construction. Particularly suitable for low roof pitch and exceptional tile shapes.

Price incl. VAT plus delivery

Item number: S-03-00061
Delivery time:
approx. 1 week

Battery terminal, Set

10.08 €

Battery terminal, round terminals for connecting cables to the battery terminals

Kit, including two battery terminals

Price incl. VAT plus delivery

Item number: S-10-00013
Delivery time:
approx. 2 to 4 weeks

SMA mounting plate for Sensor Box

30.94 €

SMA mounting plate for Sensor Box, for fixing the Box

for fixing the Sensor Box at the panel

Price incl. VAT plus delivery

Item number: S-05-00038
Delivery time:
by request

Hoppecke AquaGen premium.top H

33.49 €

Hoppecke AquaGenPremium Top H, No escape of gas or fumes

Recombination system for stationary batteries Your benefits with HOPPECKE AquaGen premium.top Reduced maintenance costs and ventilation requirements - integral catalyst for greatly extended water refilling intervals (virtually maintenance-free) Optimum recombination efficiency (similar to that of sealed valve regulated batteries) bi-directional valve reduces loss of gases and aerosols in consideration of HOPPECKE operating conditions Maximum safety integrated frame arrestor Minimum cost single investment. No replacement needed during the battery lifetime

Price incl. VAT plus delivery

Item number: S-10-00014
Delivery time:
approx. 2 to 4 weeks

Schletter punched mounting hole-tape 17x0.8

40.58 €

Schletter punched mounting hole-tape 17x0.8, hole: 5,2-5,3 mm, 50m

For connecting individual clamps as a potential connection or for fastening string cabling if mounting rails cannot be deployed.

Price incl. VAT plus delivery

Item number: S-03-00181
Delivery time:
approx. 2 to 4 weeks

Hoppecke AquaGen premium.top V

41.41 €

Hoppecke AquaGenPremium Top V, Recombination system for stationary batteries

Recombination system for stationary batteries Your benefits with HOPPECKE AquaGen premium.top Reduced maintenance costs and ventilation requirements - integral catalyst for greatly extended water refilling intervals (virtually maintenance-free) Optimum recombination efficiency (similar to that of sealed valve regulated batteries) bi-directional valve reduces loss of gases and aerosols in consideration of HOPPECKE operating conditions Maximum safety integrated frame arrestor Minimum cost single investment. No replacement needed during the battery lifetime

Price incl. VAT plus delivery

Item number: S-10-00015
Delivery time:
approx. 2 to 4 weeks

SMA Power Balancer-Connector-System PBL-SMC-10-NR

52.04 €

SMA Power Balancer for retrofitting, PBL-SMC-10-NR

Cable SMA for retrofitting single phase devices to install the Power Balancer (standard at: SMA SMC 9000/10000/11000TLRP)

Price incl. VAT plus delivery

Item number: S-04-000432
Delivery time:
by request

SMA Power Balancer Y-Connector Cable 10-PBL-YCABLE-10

66.44 €

SMA Power Balancer connection cable Y-shaped PBL-YCABLE-10

cable 2x2m Compatible with: SMC 9000/10000/11000TLRP for all other devices, the SMA Power Balancer connector system is used in addition (our Item. S 04-000432)

Price incl. VAT plus delivery

Item number: S-04-000431
Delivery time:
by request

SMA Sunny Beam antenna extender

66.64 €

SMA Sunny Beam antenna extender, 10 meters, improvement of the antenna alignment

With this external antenna kit you can improve the antenna direction if the location of the inverters and the Sunny Beam cannot be optimally chosen. So possibly a wall or ceiling can be bridged.

Price incl. VAT plus delivery

Item number: S-05-00030
Delivery time:
by request

41 - 50 from 79 Results


© Copyright 2012 NwComp Solar GmbH. All rights reserved.