Switch language: English Switch language: Deutsch

Mounting System

Our designs at a glance. We have sold Schletter and K2 Systems and other manufacturers

61 - 70 from 104 Results

Schletter FixPlan KlickTop with hanger bolt M12x200

11.25 €

Schletter FixPlan KlickTop with hanger bolt M12x200, The proven fixing now with KlickTop

Flat sheet metal roofs are usually designed as standing seam roof. For fixing of solar systems are appropriate for standing seam seam clamps available. The attachment to the fold is not always possible or recommended: Not all metal roofs have standing seams as suitable mounting option Some metal roofs are secured on the lower roof worst, these roofs advisable because of the attachment to wind uplift of the roof shell is not, an attachment to the supporting substructure is preferable. Tin roofs from titanium zinc metal are very brittle at low temperatures, an attachment to the seam is not recommended because of the linear thermal expansion of the roof shell (risk of cracking). The system allows FixPlan attachment to load-bearing parts of the substructure and at the same time fulfills the function of a tight passage through flat sheet roofing. execution KlickTop Optimized assembly time while improving static values

Price incl. VAT plus delivery

Item number: S-03-01142
Delivery time:
approx. 2 to 4 weeks

Schletter FixZ-15 system profile bottom

73.76 €

Schletter FixZ-15 system profile bottom, Further development of the proven system FixZ-7 with a steeper angle of tilt, profile bottom

Quick to assemble and easy Better ventilation Better self-cleaning higher yields Optimal load transfer through the roof With flat trapezoidal sheet metal roofs under 10 degree inclination is a parallel to the roof module mounting due to low yields and insufficient self-cleaning of the modules is not optimal. A normal elevation with supports but in many cases not economically or because of the higher loads for structural reasons not possible in these cases are often only low elevation angles are desired or feasible. Schletter FixZ-15 provides for these problem cases a simple and cost additional elevation. FixZ-15 offers the proven FixZ-7 module an even steeper angle of 11 - 15 degrees. Compared with a roof-parallel assembly even when FixZ-15 there is no installation overhead. The minimal frontal area and optimized geometry, there is only a small additional load on the roof. Please keep in case of sandwich panels in consultation with the manufacturer of the roof or with Schletter. Here, a separate examination of the capacity of the cover sheet may be necessary.

Price incl. VAT plus delivery

Item number: S-03-01127
Delivery time:
approx. 2 to 4 weeks

Schletter FixZ-15 system profile top

169.15 €

Schletter FixZ-15 system profile top, Further development of the proven system FixZ-7 with a steeper angle of tilt, profile top

Quick to assemble and easy Better ventilation Better self-cleaning higher yields Optimal load transfer through the roof With flat trapezoidal sheet metal roofs under 10 degree inclination is a parallel to the roof module mounting due to low yields and insufficient self-cleaning of the modules is not optimal. A normal elevation with supports but in many cases not economically or because of the higher loads for structural reasons not possible in these cases are often only low elevation angles are desired or feasible. Schletter FixZ-15 provides for these problem cases a simple and cost additional elevation. FixZ-15 offers the proven FixZ-7 module an even steeper angle of 11 - 15 degrees. Compared with a roof-parallel assembly even when FixZ-15 there is no installation overhead. The minimal frontal area and optimized geometry, there is only a small additional load on the roof. Please keep in case of sandwich panels in consultation with the manufacturer of the roof or with Schletter. Here, a separate examination of the capacity of the cover sheet may be necessary.

Price incl. VAT plus delivery

Item number: S-03-01126
Delivery time:
approx. 2 to 4 weeks

Schletter FixZ-7 system profile bottom

53.76 €

Schletter FixZ-7 system profile bottom, the optimum additional for slightly inclined trapezoidal sheet metal roof, Profile bottom

Quick to assemble and easy Better ventilation Better self-cleaning Optimal load transfer through the roof With flat trapezoidal sheet roofs below 10 degrees inclination, a roof-parallel module assembly is due to low yields and because of insufficient self-cleaning of the modules is not optimal. A normal elevation with supports but in many cases not economically or because of the higher loads for structural reasons not possible in these cases are often only low elevation angles are desired or feasible.

Price incl. VAT plus delivery

Item number: S-03-00112
Delivery time:
approx. 2 to 4 weeks

Schletter FixZ-7 system profile top

77.61 €

Schletter FixZ-7 system profile top, the optimum additional for slightly inclined trapezoidal sheet metal roof, profile top

Quick to assemble and easy Better ventilation Better self-cleaning Optimal load transfer through the roof With flat trapezoidal sheet roofs below 10 degrees inclination, a roof-parallel module assembly is due to low yields and because of insufficient self-cleaning of the modules is not optimal. A normal elevation with supports but in many cases not economically or because of the higher loads for structural reasons not possible in these cases are often only low elevation angles are desired or feasible.

Price incl. VAT plus delivery

Item number: S-03-00111
Delivery time:
approx. 2 to 4 weeks

Schletter Glas-Panel-End-Clamp Profi narrow 9-14mm Set

6.07 €

Schletter Glas-Panel-End-Clamp Profi narrow 9-14mm Set, for unframed modules

Professional Series Laminate inches for laminate thickness 9-14mm / 0.35 to 0.55 Glass fitting: Professional narrow 11mm, professional wide: 15mm 20mm gap between the modules including countersunk screw and square nut

Price incl. VAT plus delivery

Item number: S-03-00008
Delivery time:
approx. 1 week

Schletter Glas-Panel-End-Clamp Profi wide 9-14mm Set

6.07 €

Schletter Glas-Panel-End-Clamp Profi wide 9-14mm Set, for unframed modules

Professional Series Laminate inches for laminate thickness 9-14mm / 0.35 to 0.55 Glass fitting: Professional narrow 11mm, professional wide: 15mm 20mm gap between the modules including countersunk screw and square nut

Price incl. VAT plus delivery

Item number: S-03-00070
Delivery time:
approx. 1 week

Schletter Glas-Panel-Middle-Clamp Profi narrow 9-14mm Set

6.07 €

Schletter Glas-Panel-Middle-Clamp Profi narrow 9-14mm Set, For unframed modules

Professional Series Laminate inches for laminate thickness 9-14mm / 0.35 to 0.55 Glass fitting: Professional narrow 11mm, professional wide: 15mm 20mm gap between the modules including countersunk screw and square nut

Price incl. VAT plus delivery

Item number: S-03-00009
Delivery time:
approx. 1 week

Schletter Hanger bolt kit M12x400 without plate

5.15 €

Schletter Hanger bolt Kit M12x400, without a plate

with seal and nuts, mounted

Price incl. VAT plus delivery

Item number: S-03-00149
Delivery time:
approx. 2 to 4 weeks

Schletter KlickIn click component

0.10 €

Schletter KlickIn click component plastic holder for nut M8

for easy insertion of the M8 square nut at any desired point of the M8 KlickIn groove

Price incl. VAT plus delivery

Item number: S-03-00078
Delivery time:
approx. 1 week

61 - 70 from 104 Results


© Copyright 2012 NwComp Solar GmbH. All rights reserved.