Switch language: English Switch language: Deutsch

Mounting System

Our designs at a glance. We have sold Schletter and K2 Systems and other manufacturers

41 - 50 from 104 Results

Schletter FixZ-7 system profile bottom

53.76 €

Schletter FixZ-7 system profile bottom, the optimum additional for slightly inclined trapezoidal sheet metal roof, Profile bottom

Quick to assemble and easy Better ventilation Better self-cleaning Optimal load transfer through the roof With flat trapezoidal sheet roofs below 10 degrees inclination, a roof-parallel module assembly is due to low yields and because of insufficient self-cleaning of the modules is not optimal. A normal elevation with supports but in many cases not economically or because of the higher loads for structural reasons not possible in these cases are often only low elevation angles are desired or feasible.

Price incl. VAT plus delivery

Item number: S-03-00112
Delivery time:
approx. 2 to 4 weeks

Schletter FixZ-15 system profile top

169.15 €

Schletter FixZ-15 system profile top, Further development of the proven system FixZ-7 with a steeper angle of tilt, profile top

Quick to assemble and easy Better ventilation Better self-cleaning higher yields Optimal load transfer through the roof With flat trapezoidal sheet metal roofs under 10 degree inclination is a parallel to the roof module mounting due to low yields and insufficient self-cleaning of the modules is not optimal. A normal elevation with supports but in many cases not economically or because of the higher loads for structural reasons not possible in these cases are often only low elevation angles are desired or feasible. Schletter FixZ-15 provides for these problem cases a simple and cost additional elevation. FixZ-15 offers the proven FixZ-7 module an even steeper angle of 11 - 15 degrees. Compared with a roof-parallel assembly even when FixZ-15 there is no installation overhead. The minimal frontal area and optimized geometry, there is only a small additional load on the roof. Please keep in case of sandwich panels in consultation with the manufacturer of the roof or with Schletter. Here, a separate examination of the capacity of the cover sheet may be necessary.

Price incl. VAT plus delivery

Item number: S-03-01126
Delivery time:
approx. 2 to 4 weeks

Schletter FixZ-15 system profile bottom

73.76 €

Schletter FixZ-15 system profile bottom, Further development of the proven system FixZ-7 with a steeper angle of tilt, profile bottom

Quick to assemble and easy Better ventilation Better self-cleaning higher yields Optimal load transfer through the roof With flat trapezoidal sheet metal roofs under 10 degree inclination is a parallel to the roof module mounting due to low yields and insufficient self-cleaning of the modules is not optimal. A normal elevation with supports but in many cases not economically or because of the higher loads for structural reasons not possible in these cases are often only low elevation angles are desired or feasible. Schletter FixZ-15 provides for these problem cases a simple and cost additional elevation. FixZ-15 offers the proven FixZ-7 module an even steeper angle of 11 - 15 degrees. Compared with a roof-parallel assembly even when FixZ-15 there is no installation overhead. The minimal frontal area and optimized geometry, there is only a small additional load on the roof. Please keep in case of sandwich panels in consultation with the manufacturer of the roof or with Schletter. Here, a separate examination of the capacity of the cover sheet may be necessary.

Price incl. VAT plus delivery

Item number: S-03-01127
Delivery time:
approx. 2 to 4 weeks

Schletter FixPlan KlickTop with hanger bolt M12x200

11.25 €

Schletter FixPlan KlickTop with hanger bolt M12x200, The proven fixing now with KlickTop

Flat sheet metal roofs are usually designed as standing seam roof. For fixing of solar systems are appropriate for standing seam seam clamps available. The attachment to the fold is not always possible or recommended: Not all metal roofs have standing seams as suitable mounting option Some metal roofs are secured on the lower roof worst, these roofs advisable because of the attachment to wind uplift of the roof shell is not, an attachment to the supporting substructure is preferable. Tin roofs from titanium zinc metal are very brittle at low temperatures, an attachment to the seam is not recommended because of the linear thermal expansion of the roof shell (risk of cracking). The system allows FixPlan attachment to load-bearing parts of the substructure and at the same time fulfills the function of a tight passage through flat sheet roofing. execution KlickTop Optimized assembly time while improving static values

Price incl. VAT plus delivery

Item number: S-03-01142
Delivery time:
approx. 2 to 4 weeks

Schletter Fastening kit for corrugated roofs M12x400 incl. Plate

6.32 €

Schletter Hanger bolt Kit, fastening kit for corrugated roofs M12x400 incl. Plate

with seal, nuts and plate, mounted

Price incl. VAT plus delivery

Item number: S-03-00168
Delivery time:
approx. 2 to 4 weeks

Schletter Fastening kit for corrugated roofs M12x300 incl. Plate

4.14 €

Schletter Hanger bolt Kit, fastening kit for corrugated roofs M12x300 incl. Plate

with seal, nuts and plate, mounted

Price incl. VAT plus delivery

Item number: S-03-00167
Delivery time:
approx. 2 to 4 weeks

Schletter Fastening kit for corrugated roofs M10x200 KlickTop

4.40 €

Schletter Corrugated roof fixation kit M10x200 KlickTop
The proven fixing now with KlickTop

Optimized assembly time. Improved structural values​​. Less parts. Description: For coverings of fiber cement corrugated sheets or even with trapezoidal sheet metal roof, as well as for slate coverings usually the corrugated roof mounting kit is used. A special hanger bolt is screwed through the roof to the substructure, and carries a mounting plate to the crossmember. A UV-resistant EPDM seal with sealing cone and support collar will be fixed with a third mounting nut and seals the mounting hole safely. Please note that it may be on roofs with purlins often makes sense to move only vertical rails and the modules horizontally to place on them.

Price incl. VAT plus delivery

Item number: S-03-00170
Delivery time:
approx. 2 to 4 weeks

Schletter Fastening kit for corrugated roofs M10x200 incl. Plate

2.36 €

Schletter Hanger bolt Kit, fastening kit for corrugated roofs, M10x200, incl. Plate

with seal, nuts and plate, mounted

Price incl. VAT plus delivery

Item number: S-03-00166
Delivery time:
approx. 1 week

Schletter Fastening kit for corrugated roofs 12x300 KlickTop

6.19 €

Schletter Corrugated roof fixation kit M12x300 KlickTop
The proven fixing now with KlickTop

Optimized assembly time. Improved structural values​​. Less parts. Description: For coverings of fiber cement corrugated sheets or even with trapezoidal sheet metal roof, as well as for slate coverings usually the corrugated roof mounting kit is used. A special hanger bolt is screwed through the roof to the substructure, and carries a mounting plate to the crossmember. A UV-resistant EPDM seal with sealing cone and support collar will be fixed with a third mounting nut and seals the mounting hole safely. Please note that it may be on roofs with purlins often makes sense to move only vertical rails and the modules horizontally to place on them. Execution KlickTop: Optimized assembly time while improving static values​​.

Price incl. VAT plus delivery

Item number: S-03-00171
Delivery time:
approx. 2 to 4 weeks

Schletter Fastening kit for corrugated roofs 12x200 KlickTop

6.01 €

Schletter Corrugated roof fixation kit M12x200 KlickTop
The proven fixing now with KlickTop

Optimized assembly time. Improved structural values​​. Less parts. Description: For coverings of fiber cement corrugated sheets or even with trapezoidal sheet metal roof, as well as for slate coverings usually the corrugated roof mounting kit is used. A special hanger bolt is screwed through the roof to the substructure, and carries a mounting plate to the crossmember. A UV-resistant EPDM seal with sealing cone and support collar will be fixed with a third mounting nut and seals the mounting hole safely. Please note that it may be on roofs with purlins often makes sense to move only vertical rails and the modules horizontally to place on them. Execution KlickTop: Optimized assembly time while improving static values​​.

Price incl. VAT plus delivery

Item number: S-03-01115
Delivery time:
approx. 2 to 4 weeks

41 - 50 from 104 Results


© Copyright 2012 NwComp Solar GmbH. All rights reserved.